Choke and Kill manifold
Choke manifold and Killing manifold are the important well control equipments to carry out close balance drilling in petroleum exploration. During well drilling process, these equipments can keep oil reservoir from pollution and efficiently control well blowout. That product designs a manufacturing according to the API Spec 16 C standard, the machine function is good, sealing completely credibility, the function is well-found, operating convenience.
Main Technical Parameters
|
Name |
Choke Manifold |
Killing Manifold |
|||||
|
Type |
JG35 |
YJG35 |
YJG70 |
YJG70A |
YJG35 |
YG70 |
YG70A |
|
Main&side passage diameters |
103×65mm |
||||||
|
Working pressure |
35MPa |
70MPa |
35MPa |
70MPa |
|||
|
Working medium |
-29~121 ℃ |
||||||
|
Working medium |
ud oil (H 2 S) |
||||||
|
Type of control |
Double wing |
Double hydraulic |
Triple wing hydraulic |
Single wing with clea valve |
|||
Mud manifold
The mud manifold is applicable on land and forms a complete set with the drilling, Which working temperature is -29～121℃,medium is water or mud, and connections are threaded or flanged.
|
MAIN TECHNICAL PARAMETERS |
|||
|
Working Pressure psi(MPa) |
2000～10000(14～70) |
Nominal Bore in(mm) |
2～4 (50～100) |
|
Product Specification Level |
PSL 1～3 |
Material Class |
AA～FF |
|
Performance Requirement Level |
PR 1～2 |
Working Temperature |
P.U |